快3網站

  • 大區經理:張經理:18663767795
  • 大區經理:快3網站:13011716033
  • 技術谘詢:詹經理:18663767799
  • 傳真:0531-68850070
  • 地址:山東省濟南市曆城區工業北路58號恒大城K棟3-3109室
新聞資訊當前位置:首頁-新聞資訊
    電鍍前超聲波清洗機的清洗使用介紹
    2019-09-13 14:54:44
    超聲前處理:在電鍍前處理時必須根據工件的實際情況,采用適宜的方法進行有效清洗。金屬基材一般分為衝壓件和壓鑄件。衝壓件上麵的油汙為一般衝壓油,因其密度比較高所以比較容易清洗。一般可用酸洗、電解等。視廠家情況進行超聲清洗則效果更佳。
    Ultrasonic pretreatment: before electroplating treatment must be based on the actual situation of the workpiece, the appropriate method for effective cleaning. Metal substrates are generally divided into stamping parts and die castings. Stamping above the oil for the general stamping oil, because of its relatively high density so easy to clean. Generally available pickling, electrolysis, etc.. Ultrasonic cleaning is better if the manufacturer.
    而鋅、鋁、銅等的壓鑄件屬比較難清洗的。因壓鑄件中添加了各種元素,此外在成型、拉升、壓延、切削、拋光的過程中還必須使用各種油品,如機油、拋光油等。對於超聲波請洗機來講,機油可以輕鬆去除。但拋光油分為黃油白油、綠油等,這就比較難以去除。
    And zinc, aluminum, copper and other die-casting parts are more difficult to clean. Because of pressure casting is added with various elements, in addition, in the process for molding, calendering, cutting and polishing must also use a variety of products, such as oil, polishing oil etc.. For ultrasonic washing machine, oil can be easily removed. But polishing oil into butter oil, green and so on, it is difficult to remove.
    因此,必須選擇合適的超聲清洗設備和清洗液。如一個材料為銅質的三角閥,拋光後即清洗,拋光油為白油、黃油,槽液溫度為70℃,超聲功率為1.0W/cm時,在普通清洗溶液中3-4分鍾就能洗幹淨,得到合適的電鍍表麵.但在拋光油為綠油時,先必須浸泡再選用除油效果好的清洗液(本公司的德國產的S 104、鴻運除蠟水等),槽液溫度也為70℃,超聲功率為1.5KW/cm時,還需4-5分鍾才能得到合適的電鍍表麵。
    Therefore, appropriate ultrasonic cleaning equipment and cleaning solution must be selected. As a material for the copper triangle valve, namely cleaning polishing, polishing oil for oil, butter, the bath temperature is 70 DEG C, the ultrasonic power is 1.0W/cm, in the ordinary cleaning solution 3-4 minutes to wash, get the right. But in the plating surface polishing oil for green, must be soaked again in addition the cleaning liquid oil well (the company's German S fortune 104, removing wax water etc.), the bath temperature is 70 DEG C, the ultrasonic power is 1.5KW/cm, it takes 4-5 minutes to get a suitable plating surface.
    本文由全自動超聲波清洗機為您提供,我們的網站是: http://www.humg.cn我們將以全心全意的熱情為您提供更優質的服務,歡迎您的訪問!
    This article by the automatic ultrasonic cleaning machine to provide you, our website is: http://www.humg.cn we will wholeheartedly to provide you with better quality service, welcome your visit!
買球app排行_Wellcome!!|新啟旺_Wellcome!!|樂博彩票官方—歡迎您!|彩世界下載—歡迎您!|5分快三彩票-首頁|百盛娛樂-首頁| |