快3網站

  • 大區經理:張經理:18663767795
  • 大區經理:快3網站:13011716033
  • 技術谘詢:詹經理:18663767799
  • 傳真:0531-68850070
  • 地址:山東省濟南市曆城區工業北路58號恒大城K棟3-3109室
新聞資訊當前位置:首頁-新聞資訊
    小型數控超聲波清洗機正確操作
    2019-09-13 15:15:09
    1、開箱後,檢查零件有否鬆脫;
    1, after the opening, check whether there is loose parts;
    2、機器放置在通風幹燥的地方,確保機器處於水平位置;
    2, the machine placed in ventilated dry place, ensure the machine in horizontal position;
    3、按清洗所需加入適量的清洗液於清洗槽內;
    3, according to the cleaning need to add appropriate cleaning fluid in the cleaning tank;
    4、正確連接電源插頭:請務必確保所供電源可靠接地!
    4, the correct connection power plug: please be sure to provide reliable grounding power supply!
    5、調節超聲波工作時間:
    5, adjust ultrasonic working time:
    打開電源開關,通電後,時間顯示屏均顯示“05 00”。每按時間Δ鍵一次,時間增加1分鍾; 每按時間▽鍵一次,時間可減少1分鍾。(可自由選擇並數碼倒計時控製。)
    Open the power switch, power, the time display are shown "0500". Every time according to the delta key once the time increase 1 minutes every time; press button once, time can be reduced by 1 minutes. Free choice and digital countdown control.
    6、調節工作溫度(如有需要再選擇加熱):
    6, adjust the working temperature (if necessary, then choose heating):
    通上電源後,溫度設置屏與實際溫度屏分別顯示“50”和“實際溫度數”。每按溫度Δ鍵一次,溫度上調1°C; 每按溫度▽鍵一次,溫度下調1°C。當低於實際溫度時,操作無效。當溫度達到設定溫度時,加熱指示燈滅。超聲波工作時,兩個溫度顯示屏處分別顯示所設置的溫度及實際已達到的溫度。
    After the power is turned on, the temperature setting screen and the actual temperature screen respectively display "50" and "actual temperature". According to the temperature of each delta key once, the temperature increase of 1 degrees C; each according to the temperature button once, the temperature by 1 degrees C. When the actual temperature is below, the operation is invalid. When the temperature reaches the set temperature, the heating indicator lights off. Ultrasonic work, the two temperature display at the display of the set temperature and the actual temperature has been reached.
    7、設定好工作時間和溫度後,輕按ON/OFF一下,機器按商定參數工作。再按ON/OFF一下,機器停止工作。然後斷開整機電源,倒掉清洗液,用幹淨抹布對槽體及外圍進行清潔保養,以備下一次使用。
    7, set a good working time and temperature, light press ON/OFF, the machine work according to agreed parameters. Press ON/OFF again, the machine stops working. Then disconnect the power, pour the cleaning liquid for cleaning and maintenance of the body and the periphery with a clean cloth, for the next time.
    就先介紹到這裏了,相信大家在實際的工作中會用到全自動超聲波清洗機 http://www.sinokohl.com相關知識,如果您有這方麵的需要,歡迎前來谘詢。
    First introduced here, I believe we will in the actual work will use automatic ultrasonic cleaning machine http://www.humg.cn related knowledge, if you have this need, welcome to consult.
買球app排行_Wellcome!!|新啟旺_Wellcome!!|樂博彩票官方—歡迎您!|彩世界下載—歡迎您!|5分快三彩票-首頁|百盛娛樂-首頁| |